Wood Tile Installation
Wood tiles have gained popularity in interior and exterior design in recent years. This is mainly due to the evolution of preferences in natural-looking themes using wood but with the durability of a tile. For a closer resemblance to original wood planks, tile prints can now mimic the colour and structure of wood. The tiles are then cut into long rectangles following the shape of original wood planks. Here are some installation tips from our tile experts on long wood tiles.
01.Levelling the Floor
Any imperfection on the floor levels will result in imperfections once you lay the tiles. It’s important to remember that you should screed all unlevelled concrete surfaces prior to installation of the tile.
02.Choose The Right Adhesive
Text BoxZirconio tiles are tested for heat expansion, so they are resistant to breaking due to expansion. But it is also important that you choose the right type of adhesive especially for laying outdoor tiles where they are frequently exposed to temperature changes. The adhesive you choose should allow for some flexibility. Unique surfaces need further customisations thus it is advisable to seek further advice.
03.Laying Out The Tiles
It is normal to have some minute bows in most tiles and installing timber look tiles is no exception. For this reason, we recommend offsetting timber look tiles no more than 20 percent of the length of the tiles.
The fewer grout joints you see, the more seamless the result will look. Most timber look tiles have rectified edges. With rectified tiles, your grout joints may look narrower than with traditional non-rectified tiles. The recommended minimum grout joint width for floor tiles is 3mm.
You may want to check out our wood collection!